When it comes to diverters, we recommend replacing all diverters with iotty Smart Switch plates so you can take advantage of the "Wireless Diverter" function via Wi-Fi.
In this case, all you need to do is connect one iotty switch to the source/lamp and the others will be connected via Wi-Fi. In this way, you can reproduce existing situations or create new diversions where there were none before.
The following physical wiring needs to be performed:
The RLs (iotty switch relays) circled in red are those involved in the automation. The order and the RLs/switches to be used may vary as required, the picture is just an example. What is important is that only one of the RL/switches is physically connected to the source (in the picture it is the central IOTTY plate). The other switches automatically involved must be free, otherwise the light connected to these will be switched on at the same time as the diversion light.
Once the physical installation has been completed, we move on to installation via the app.
In the absence of an internet connection, the source can always be controlled from the physically connected push button switch; the switches that are not physically connected will not be able to turn on the light until the internet connection is restored.
With this wiring, only one switch per plate is used for the diversion. As no additional cabling is required, an infinite number of switches can be involved without the need for invasive work and the smart functionalities can be utilised 100%.